‘Use By’ vs ‘Best Before’ Dates

Phased Array Ultrasonic Testing (PAUT) employs a multi-element transducer where each element is pulsed independently with precise, computer-calculated time delays. By controlling this phasing, the resulting ultrasonic beam can be electronically steered, focused, and scanned without physically moving the probe. This provides rapid, detailed imaging of flaws, especially in complex geometries, surpassing conventional single-element techniques.

Iterative design is a design methodology based on a cyclic process of prototyping, testing, analyzing, and refining a product or process. Based on the results of testing the most recent iteration, changes and refinements are made. This process is intended to ultimately improve the quality and functionality of a design by repeatedly cycling through these steps.

Stereolithography is a vat photopolymerization additive manufacturing process. It employs an ultraviolet (UV) laser to selectively cure and solidify a liquid photopolymer resin. A build platform is submerged in the resin, and the laser traces a cross-section of the object on the surface. The platform then moves down by one layer thickness, allowing a new layer of resin to be cured on top.

Six Sigma is a disciplined, data-driven methodology for eliminating defects in any process – from manufacturing to transactional and from product to service. The statistical representation of Six Sigma describes a process where 99.99966% of all opportunities to produce some feature of a part are statistically expected to be free of defects (3.4 defects per million opportunities).

Selective Laser Sintering is a powder bed fusion additive manufacturing process. It utilizes a high-power laser to selectively sinter, or fuse, particles of a polymer powder. A roller spreads a thin layer of powder over a build area, the laser scans a cross-section of the part, and the build platform lowers. This process repeats, building the object layer-by-layer.

High-precision CNC machines employ a closed-loop control system to ensure accuracy. This system uses feedback devices, such as rotary encoders on servomotors or linear scales on the machine axes, to continuously monitor the machine's actual position. The controller compares this real-time feedback with the commanded position from the program and makes immediate corrections, compensating for errors.

FMECA is an extension of FMEA that includes a criticality analysis, which charts the probability of failure modes against the severity of their consequences. This allows for a quantitative ranking of failure modes based on the combined influence of their severity and probability. The result highlights single points of failure and helps prioritize corrective actions based on a more rigorous risk level.

Indoor concentrations of VOCs from sources like building materials, furniture, and cleaning agents often exceed outdoor levels. Total Volatile Organic Compounds (TVOC) is a metric representing the summed concentration of multiple individual VOCs in the air. It is widely used as a general screening tool for assessing indoor air quality (IAQ), though it doesn't distinguish between high and low toxicity compounds.

Concurrent engineering, also known as simultaneous engineering, is a design philosophy that emphasizes the parallelization of tasks. Instead of a sequential process where design is completed before manufacturing is considered, it involves a team-based approach where designers, manufacturing engineers, and other stakeholders work together from the outset. This overlap significantly reduces product development time and improves design quality.

The Juran Trilogy, developed by Dr. Joseph M. Juran, is a foundational quality management approach consisting of three interconnected processes: Quality Planning, Quality Control, and Quality Improvement. This framework provides a structured way for organizations to manage for quality. It emphasizes that quality does not happen by accident; it must be planned and managed systematically.

Parametric modeling is a CAD paradigm where designs are defined by parameters and constraints rather than just geometric shapes. Dimensions and relationships between features (e.g., parallelism, tangency) are stored as parameters. Modifying a parameter value automatically updates the entire model, maintaining the defined constraints. This approach facilitates design iteration, automation, and the creation of design families.