Hume-Rothery Rules for Solid Solutions (metallurgy)

Jidoka, often translated as "autonomation" or "automation with a human touch," is a pillar of the Toyota Production System. It empowers any machine or worker to halt the entire production line upon detecting an abnormality or defect. This prevents the mass production of faulty items and immediately highlights problems, enabling root cause analysis and permanent solutions.

The Oberth effect describes how a rocket engine's use is more efficient at high speeds than at low speeds. A rocket burn performed at high speed, such as at the periapsis of an orbit, generates a greater change in kinetic energy than the same burn at low speed. This is because the propellant itself has kinetic energy before being burned.

Takt time is the maximum time allowed to produce a product to meet customer demand. It is calculated by dividing the net available production time by the customer demand over that period. The formula is \(T = \frac{T_a}{D}\), where T is the Takt time, Ta is the net available time, and D is the customer demand.

An iterative method for analyzing statically indeterminate beams and frames. Developed by Hardy Cross, it involves successively locking and unlocking joints to distribute moments until equilibrium is reached. It was a standard hand-calculation technique before the widespread use of computers for structural analysis, simplifying complex problems into a series of arithmetic steps based on member stiffness and carry-over factors.

A reversing valve is a type of four-way valve that is a critical component in a reversible heat pump. It changes the direction of refrigerant flow through the system. This allows the heat pump to switch its function from cooling in the summer to heating in the winter, by making the indoor coil the condenser (for heating) or the evaporator (for cooling).

High-Efficiency Particulate Air (HEPA) and Ultra-Low Particulate Air (ULPA) filters are critical cleanroom components. A HEPA filter must remove at least 99.97% of airborne particles 0.3 micrometers (µm) in diameter. An ULPA filter is even more efficient, removing 99.999% of particles 0.12 µm or larger. They work via a combination of interception, impaction, and diffusion.

Zyklon B was a trade name for a cyanide-based pesticide. Its active ingredient was hydrogen cyanide (\(HCN\)), a highly volatile poison. The liquid HCN was adsorbed onto a porous solid carrier, such as diatomaceous earth or wood pulp discs. A stabilizer was added to prevent polymerization, and a warning agent, an eye irritant, was typically included for safety (deliberately removed from the commercial version for the mass murder version).

A Hohmann transfer is an orbital maneuver that moves a spacecraft between two coplanar circular orbits using two engine impulses. It is generally the most fuel-efficient two-burn maneuver. The transfer orbit is an ellipse that is tangential to both the initial and final orbits at its apoapsis and periapsis, requiring one burn to enter the ellipse and another to circularize.

Pitting corrosion is a localized form of corrosion that leads to the creation of small holes, or 'pits,' in a metal. It is one of the most destructive forms because it is difficult to detect, predict, and design against. Pitting can cause catastrophic failure of a structure with only a small percentage of total mass loss.

Liquid metal embrittlement is a phenomenon where a normally ductile solid metal experiences a severe loss of ductility and fails in a brittle manner when wetted by a specific liquid metal while under tensile stress. The failure is often catastrophic and rapid. The mechanism involves the liquid metal atoms adsorbing at a crack tip, which reduces the cohesive strength of the solid's atomic bonds.

Net Positive Suction Head (NPSH) is a critical parameter in pump engineering that measures the fluid pressure at the pump's suction inlet relative to its vapor pressure. To prevent cavitation—the damaging formation and collapse of vapor bubbles—the available NPSH (NPSHa) of the system must always be greater than the required NPSH (NPSHr) specified by the pump manufacturer.

High-Test Peroxide (HTP), a highly concentrated solution of H₂O₂ (typically 85-98%), is used as a monopropellant in rocketry. When passed over a catalyst, usually silver or platinum, it rapidly decomposes into a high-temperature mixture of steam and oxygen. This hot gas is then directed through a nozzle to generate thrust, powering rockets, torpedoes, and reaction control systems.

Just-in-Time (JIT) is a production strategy aimed at increasing efficiency and decreasing waste by receiving goods only as they are needed in the production process, thereby reducing inventory costs. This method requires precise forecasting and highly coordinated supply chains. The goal is to have the right materials, at the right place, at the right time, in the exact amount.