
Los superconductores de alta temperatura conducen sin resistencia de CC a temperaturas muy superiores a las de los superconductores metálicos convencionales, con temperaturas críticas cercanas a los 90 K en el REBCO. Los conductores comerciales son principalmente cintas conductoras recubiertas de REBCO e hilos de BSCCO. Su utilidad se define por la densidad de corriente crítica, el campo crítico y la tolerancia a la deformación. Entre sus aplicaciones se incluyen imanes de fusión, sistemas de resonancia magnética (RM) y resonancia magnética nuclear (RMN), generadores eólicos, motores eléctricos de aeronaves y cables de alimentación.
La fabricación y la protección son los aspectos más complejos. La producción de cintas de gran longitud mediante deposición asistida por haz de iones y métodos químicos debe mantener una corriente crítica uniforme. El coste por kiloamperio-metro limita el crecimiento del mercado. Los diseñadores de imanes se ocupan de la detección de la extinción, el bobinado sin aislamiento, las corrientes de apantallamiento y la resistencia de las uniones, dado que estas bobinas almacenan grandes cantidades de energía en volúmenes reducidos. Los superconductores de hidruro, hierro y niquelato amplían las fronteras de la investigación. Las publicaciones y patentes indexadas a continuación abarcan conductores, imanes, cables, limitadores de corriente de falla, integración criogénica y nuevos materiales superconductores.
Los cables HTS transportan corriente sin resistencia a temperaturas que puede alcanzar el nitrógeno líquido. El enfriamiento está activado. criogenia, la física en física de la materia condensadaLos grandes usuarios son fusión imanes y aceleradores de partículas. Los cables de la red se conectan a redes inteligentes.
Esta es nuestra selección más reciente de publicaciones y patentes mundiales en inglés sobre superconductores de alta temperatura (HTS), entre numerosas revistas científicas en línea, clasificadas y centradas en superconductores de alta temperatura, REBCO, YBCO, BSCCO, conductores recubiertos, cintas superconductoras, imanes HTS, densidad de corriente crítica, cables superconductores, limitadores de corriente de falla, almacenamiento de energía magnética superconductora, bobinas sin aislamiento, protección contra la extinción, fijación de flujo, superconductores a base de hierro, superconductores de hidruro, superconductores de niquelato, cupratos, motores superconductores y juntas superconductoras.
A reduced diameter cryostat component and superconducting cable assembly employing same
Patent published on the 2026-11-04 in EP under Ref EP4835919 by SUPERNODE LTD [IE] (Acin Marcos [ie], Carlisle Andrew [ie], Stringer Peter [ie], O Donovan Daniel [ie])
Abstract: [0001] The present invention provides a cryostat component comprising an elongate cylindrical tubular sidewall formed from fibre reinforced thermoplastic and having an inner diameter of less than 50mm; wherein the fibre reinforcement is optimised to provide the cryostat component with a coefficient of thermal expansion in an axial direction of +/- 15ppm/°C, in addition to a superconducting cable assembly comprising one or more of the cryostat components, in particular for use as a former for on[...]
Our summary: The invention features a cryostat component with a cylindrical sidewall made from fibre reinforced thermoplastic. It has an inner diameter of less than 50mm and a thermal expansion coefficient of +/- 15ppm/°C. The component is designed to serve as a former for superconductors in a cable assembly.
cryostat, superconducting cable, fibre reinforced thermoplastic, thermal expansion
Patent
Critical photoinduced reflectivity relaxation dynamics in single-layer Bi-based cuprates near the pseudogap end point
Published on 2026-09-02 by T Shimizu, R Tobise, T Kurosawa, S Tsuchiya, M Oda, Y Toda, V V Kabanov, D Mihailovic and T Mertelj @IOP SCIENCE
Abstract: A comprehensive study of photoinduced transient reflectivity dynamics in heavily overdoped single-layer cuprate (Bi,Pb) Sr CuO (Pb-Bi-2201) across the end points of the pseudogap (PG) and superconducting phases was conducted using optical ultrafast time-resolved pump-probe spectroscopy. In the Pb-Bi-2201 near the proposed PG end-point doping (PGED), the transient reflectivity dynamics above resemble the PG response observed in the optimally doped La-Bi-2201. With decreasing temperature, however,[...]
Our summary: This study investigates the transient reflectivity dynamics in single-layer Bi-based cuprates near the pseudogap end point. It reveals a power-law divergence in relaxation time consistent with quantum critical behavior as temperature decreases. The findings show similarities in dynamics between heavily overdoped Pb-Bi-2201 and optimally doped La-Bi-2201.
photoinduced reflectivity, cuprates, pseudogap, ultrafast spectroscopy
Publication
Grooved, nested-cylinder, layer-wound superconducting magnets and related construction techniques
Patent published on the 2026-07-09 in WO under Ref WO2026147855 by MASSACHUSETTS INST OF TECHNOLOGY [US] (Mouratidis Theodore [us], Labombard Brian [us], Austin Samuel [us])
Abstract: Described is a no-insulation superconducting magnet design that utilizes high temperature superconducting tapes arranged in a layer-wound configuration. The design is compact, modular and utilizes a fabrication methodology that scales well for commercialization. Embodiments described herein may find use in a wide variety of applications including, but not limited to solenoidal magnets in general, including devices operating at very high magnetic field strength and also in plasma thrusters for [...]
Our summary: The content discusses a no-insulation superconducting magnet design using high temperature superconducting tapes. It emphasizes a compact and modular design suitable for commercialization. Applications include solenoidal magnets and plasma thrusters for spacecraft propulsion.
superconducting magnets, high temperature superconductors, layer-wound configuration, plasma thrusters
Patent
Modelling, Optimisation, and Construction of a High-Temperature Superconducting Maglev Demonstrator
Published on 2026-01-16 by Chenxuan Zhang, Qian Dong, Hongye Zhang, Markus Mueller @MDPI
Abstract: To achieve global carbon-neutrality goals, magnetic levitation (maglev) technologies offer a promising pathway toward sustainable, energy-efficient transportation systems. In this study, a comprehensive methodology was developed to analyse and optimise the levitation performance of high-temperature superconducting (HTS) maglev systems. Several permanent magnet guideway (PMG) configurations were compared, and an optimised PMG Halbach array design was identified that enhances flux concentration an[...]
Our summary: This study develops a methodology to optimise the levitation performance of high-temperature superconducting maglev systems. An optimised PMG Halbach array design enhances flux concentration and improves levitation performance. The 3D finite element model accurately predicts levitation forces, confirming the model s reliability for HTS maglev systems.
Superconductivity, Maglev, Finite Element Analysis, Optimisation
Publication
















