Últimas publicaciones y patentes sobre termoestables

A solar cell's core is a p-n junction, an interface between p-type and n-type semiconductor materials. This junction creates a built-in electric field in a depletion region. When photons with sufficient energy strike the semiconductor, they create electron-hole pairs. The electric field separates these charge carriers, driving electrons to the n-side and holes to the p-side, generating a voltage.

Just-in-Time (JIT) is a production strategy aimed at increasing efficiency and decreasing waste by receiving goods only as they are needed in the production process, thereby reducing inventory costs. This method requires precise forecasting and highly coordinated supply chains. The goal is to have the right materials, at the right place, at the right time, in the exact amount.

The Weissenberg effect is a phenomenon in viscoelastic fluids where the fluid climbs up a rotating rod inserted into it. This is contrary to the behavior of Newtonian fluids, which are pushed outwards by centrifugal force, forming a vortex. The effect is caused by normal stress differences that develop in the fluid under shear.

Plasticity is the theory describing the deformation of a solid material undergoing non-reversible changes of shape in response to applied forces. Unlike elasticity, where deformation is recovered upon unloading, plastic deformation is permanent. The theory involves a yield criterion to define the onset of plasticity, a flow rule to describe the evolution of plastic strain, and a hardening rule.

Digital circuits are categorized into two main types: combinational and sequential logic. In combinational logic, the output is a pure function of the present input values only (e.g., an adder). In sequential logic, the output depends not only on the current inputs but also on the past sequence of inputs, as these circuits have memory elements (e.g., a flip-flop).

A foundational economic fact is that the total monetary volume of business-to-business (B2B) transactions significantly surpasses that of business-to-consumer (B2C) transactions. This is because a single finished consumer product often involves a long supply chain with multiple B2B transactions—from raw materials to manufacturing components to wholesale distribution—before the final B2C sale occurs.

The reliability function, R(t), defines the probability that a system or component will perform its required function without failure for a specified time 't'. For systems with a constant failure rate (λ), it is described by the exponential distribution: [latex]R(t) = e^{-\lambda t}[/latex]. This function is fundamental to predicting the longevity and performance of a product.

High-Efficiency Particulate Air (HEPA) and Ultra-Low Particulate Air (ULPA) filters are critical cleanroom components. A HEPA filter must remove at least 99.97% of airborne particles 0.3 micrometers (µm) in diameter. An ULPA filter is even more efficient, removing 99.999% of particles 0.12 µm or larger. They work via a combination of interception, impaction, and diffusion.

Cellular respiration is a series of redox reactions where organic molecules, like glucose, are oxidized to release energy. Glucose ([latex]C_6H_{12}O_6[/latex]) is oxidized to [latex]CO_2[/latex], while oxygen ([latex]O_2[/latex]) is reduced to water ([latex]H_2O[/latex]). This process transfers electrons through an electron transport chain, creating a proton gradient that drives the synthesis of ATP, the cell's primary energy currency.

The Finite Element Method (FEM) is a powerful numerical technique for solving complex engineering and physics problems described by partial differential equations. It works by discretizing a continuous domain into a set of smaller, simpler subdomains called 'finite elements'. This allows for the approximate numerical solution of problems in structural analysis, heat transfer, fluid flow, and electromagnetism.

FMEA is a systematic, bottom-up, inductive method for identifying potential failure modes in a system, product, or process. For each failure mode, it assesses the potential effects or consequences, their severity, likelihood of occurrence, and the ability to detect them. The goal is to prioritize and mitigate high-risk failure modes before they occur.

Sheaf cohomology is a central tool in modern algebraic geometry for studying global properties of geometric spaces. For a sheaf [latex]\mathcal{F}[/latex] on a space [latex]X[/latex], the cohomology groups [latex]H^i(X, \mathcal{F})[/latex] are vector spaces whose dimensions provide important invariants. The group [latex]H^0[/latex] represents global sections, while higher groups [latex]H^i[/latex] for [latex]i > 0[/latex] measure the obstructions to patching together local sections into a global one.

The marketing concept is a business philosophy holding that achieving organizational goals depends on knowing the needs and wants of target markets and delivering the desired satisfactions more effectively and efficiently than competitors. It represents a shift from a product-centric ("make and sell") approach to a customer-centric ("sense and respond") one, placing the customer at the core of all business decisions.

The bathtub curve is a graphical model illustrating three phases of a product's life in terms of failure rate. It starts with a high but decreasing 'infant mortality' rate, followed by a low, constant 'useful life' rate, and concludes with an increasing 'wear-out' rate. MTBF calculations using a constant failure rate ([latex]\lambda[/latex]) are typically only valid during the central 'useful life' phase.

The PDCA cycle, also known as the Deming Cycle or Shewhart Cycle, is an iterative four-step management method used for the control and continuous improvement of processes and products. It provides a simple and effective approach for solving problems and managing change, ensuring that ideas are tested on a small scale before being implemented organization-wide.