Product Design, Manufacturing & Innovation Resources

射出成形

Injection molding forces molten polymer into a steel cavity, cools it and ejects the part. Cycle times are short and unit cost is low. The tool, however, is a major investment, so every design decision is taken with the mold in mind.

Plastic Bottle Preform with Corresponding Final Bottle CapThe illustrated collection of plastics design tricks shows what the process makes possible: clips, ribs, latches, living hinges and reinforcements. A fly swatter design review shows what happens when stress concentration is ignored. The plastic bottle factory tour follows the preform, an injection molded part, before it is blown.

Before volume production comes the pilot run, described in a dedicated article on validating tooling, assembly and quality control. Vacuum forming is presented as an alternative for custom plastic sheet parts. A digest tracks research on thermoplastics. General rules are under 製造を考慮した設計, materials under 高分子.

ジガー・パテルのロゴ工場。ロゴ・ファクトリー from ジガー・パテルブランディング戦略

Jigar Patelによるロゴファクトリー

アーティストのジガー・パテル氏が、現代のロゴがどのように「作られる」かについて、CGIを用いた独自の視点で解説しています。とても楽しく、クリエイティブな瞬間が満載です。そして、その理由は……

プラスチックのトリック

プラスチック設計のコツ集

プラスチック設計理論はなく、射出成形で実現可能な最も一般的なプラスチック設計の特徴を豊富な図解例で紹介している。.

10年目 周年

フルサイズの画像とダウンロードは、登録会員のみが100%無料で利用できます。