Qualimet Inc.

Canada

All business names, logos, and images are used for informational purposes only. If you are the owner of any image or content displayed and wish to remove or update it, please contact us. By claiming your listing – see link at the bottom- you can upload your official media and desired texts.

Qualimet Inc. is a Canadian materials testing, metallurgical consulting, and welding engineering firm headquartered in Edmonton, Alberta. Established in 1973, Qualimet maintains engineering registrations across six Canadian jurisdictions: British Columbia, Alberta, Saskatchewan, Manitoba, Ontario, and the Yukon.

The company operates an in-house ISO/IEC 17025 accredited metallurgical testing laboratory that conducts forensic material failure analysis, structural inspections, and mechanical testing. In failure investigations, Qualimet evaluates operating scenarios, loads, environmental factors, and service history prior to testing to define the root cause of component degradation or fracture and provide actionable corrective paths.

Certifications and registrations: ISO/IEC 17025 accredited laboratory (A2LA 6108.01), CWB certified, ABSA registered
Operating facility: 8055 Coronet Road, Edmonton, Alberta
Active since: 1973

Offer

Qualimet provides metallurgical testing, failure investigations, and quality compliance testing across industrial materials:

Material Failure Analysis & Root Cause Investigation: Investigation of component failure modes (such as fatigue, brittle fracture, ductile overload, and corrosion) in metals, polymers, elastomers, and composites, accompanied by forensic reports and corrective action support.
Destructive Metallurgical Testing: Brinell, Vickers, and Rockwell hardness testing; ambient and elevated-temperature tensile testing; compression testing; guided bend testing; Charpy V-notch impact testing; low-temperature impact testing down to -80°C; chemical analysis; and microstructural and macrostructural examination.
Non-Destructive Testing (NDT): Visual inspection (VT), magnetic particle testing (MT/Magnafluxing), ultrasonic inspection (UT), liquid dye penetrant testing (PT), corrosion mapping (zero-degree scan), in-situ metallography, and ferrite measurement.
Welding Engineering & Inspection: Development and qualification of Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR) under ASME, ABSA, and CWB standards, as well as structural steel inspection to CSA W59 and W178.

Qualimet Inc.

Offer

Tags