
最新の出版物:CADソフトウェアに関する特許
今週のテーマ:発泡体の製造、CADソフトウェア、熱可塑性エラストマー、発泡プロセス、機械加工、CAD/CAM、時間解析、プロセス最適化、メカトロニクス駆動、BLDCサーボモーター、
Additive processes build parts layer by layer, and that changes the design rules. Undercuts cost nothing. Overhangs need support. Strength depends on build orientation, and a lattice can replace solid material where loads are low. Design for 積層造形, DfAM, is the practice of using these facts instead of copying a machined shape.
Part consolidation is the usual first gain: several brackets and fasteners become one printed body. The second is internal geometry, such as conformal cooling channels, that no cutter could reach.
Content here pairs tools with research. The CAD software directory and the reverse engineering article help produce printable geometry. Digests report on 4D printing, bio-printing, MEMS and additive manufacturing at large. For conventional processes, compare with 製造を考慮した設計.

今週のテーマ:発泡体の製造、CADソフトウェア、熱可塑性エラストマー、発泡プロセス、機械加工、CAD/CAM、時間解析、プロセス最適化、メカトロニクス駆動、BLDCサーボモーター、

This week: metal filter, sintering, porosity, filtration layer, thermoplasmonics, phase separation, self-assembly, 3D printing, build plate, microstructures, 3D printing, adhesion,

This week: MEMS oscillator, phase noise, gyroscope, sustaining circuit, MEMS, satellite, attitude control, orientation sensor, MEMS, capacitive sensor, frequency signal,

アーティストのジガー・パテル氏が、現代のロゴがどのように「作られる」かについて、CGIを用いた独自の視点で解説しています。とても楽しく、クリエイティブな瞬間が満載です。そして、その理由は……

エンジニアだけのものではありません(ありきたりですが!):2時間以内にルービックキューブを解けるようになりましょう。これほど長く楽しませてくれるパズルはめったにありません。
デザイナーもプロダクト・マネージャーも、製品をその主要な機能のために使用する最終顧客のことを忘れることはないだろう。しかし

製品設計における多機能性はリスクを伴います。あまりにも多くの機能を組み合わせようとすると、結果として

1930年に制作されたラルフ・スタイナーの映画『Mechanical Principles』は、学生時代を改めて思い出すのに絶好の機会となる作品です。

製品設計エンジニアの皆様へ。40のTRIZ原則は、製品設計における問題解決において生じる「TRIZの矛盾」を解決するための手法です。

ビデオゲームでしかできないと思っている人のために......ここにある、素晴らしい2Dマーブルゲーム・カプラスだ、,
フルサイズの画像とダウンロードは、登録会員のみが100%無料で利用できます。
> ログイン <