CasaUltime NewsUltime notizie sulla produzione additiva

Ultime notizie sulla produzione additiva

Below are excerpts of the latest Additive Manufacturing news found online, copyrighted and direct link to their respective authors. Found, selected, and sorted. Any problem or additional source you would like to include here, please contact us.

  • Unraveling the secrets of microplastics released by tires
    24.11.22 - In Switzerland, tire and road wear particles are one of the biggest sources of microplastics released into the environment, yet the chemical compounds contained in those particles – and their effects – remain largely a mystery. To remedy that knowledge gap, scientists at EPFL and two other Swiss...
    Fonte: EPFL
  • With new heat treatment, 3D-printed metals can withstand extreme conditions
    A technique that transforms the metals’ microscopic structure may enable energy-efficient 3D printing of blades for gas turbines or jet engines....
    Fonte: MIT: Ricerca di Jennifer Chu | Ufficio stampa del MIT
  • Produzione di oggetti 3D con interfaccia liquida a iniezione continua | Science Advance...
    iCLIP consente la creazione rapida di oggetti complessi in 3D con resine composite ad alta viscosità e più materiali contemporaneamente....
    Fonte: Scienza - Anticipazioni
  • Applicazioni, meccanica dei fluidi e scienza colloidale dei nanotubi di carbonio 3D...
    Nanoscale, 2022, Accepted ManuscriptDOI: 10.1039/D1NR04912G, Review ArticleBeihan Zhao, Vishal Sankar Sivasankar, Swarup Kumar Subudhi, Shayandev Sinha, Abhijit Dasgupta, Siddhartha DasAdditive manufacturing, also known as 3D printing (3DP), is a novel and developing technology, which has a wide range of industrial and scientific applications. This technology has continuously progressed over...The content...
    Fonte: RSC | Nanoscala di Beihan Zhao
  • Un'implementazione pratica dell'ottimizzazione topologica multifisica
    Un blogger ospite di GN Audio A/S presenta un framework di topologia multifisica sviluppato con l'Application Programming Interface di COMSOL e LiveLink™ per MATLAB®....
    Fonte: Comsol di Junghwan Kook
  • La stampa 3D e l'autoassemblaggio promettono nuove ceramiche
    3D printed pre-ceramic polymer and pre-ceramic polymer component, after cross-linking but before conversion to ceramic.3D printed log pile structure folded into a tube-like structure, then cross-linked and fired at high temperature to convert the structure into a hierarchically structured ceramic.3D printed log pile sheet folded into a paper airplane shape,...
    Fonte: Materiali oggi
  • Migliori pratiche per ottenere la certificazione SOLIDWORKS
    When you obtain SOLIDWORKS Certification you will be proving that you are proficient with SOLIDWORKS software. Standing out amongst SOLIDWORKS users from around the world can be challenging. Earning a SOLIDWORKS Certification can help you get a job, keep a job, or possibly move up in your current job. Here are...
    Fonte: Il blog Javelin da TriMech Solutions, LLC
  • Il metodo di produzione additiva ottiene un aumento della velocità in radiofrequenza
    New curing technique speeds up direct ink writing Thermosetting polymers, such as epoxy resins, are ubiquitous in the modern world. Their high mechanical strength and thermal stability has seen them used in everything from batteries to construction materials. But manufacturing components from such polymers is a slow and intensive process,...
    Fonte: Materiali oggi
  • Il microlattice polimerico beneficia di un lento riscaldamento
    The four types of 3D printed microlattice studied in this work: as-fabricated, under-carbonized, partially carbonized and over-carbonized. Photo: Surjadi, James et al., /doi.org/10.1016/j.matt.2022.08.010.Developing a lightweight material that is both strong and highly ductile has been regarded as a long-desired goal in the field of structural materials, but these properties are...
    Fonte: Materiali oggi
  • Progettati inchiostri per la bioelettronica indossabile stampabile in 3D
    Additive Manufacturing Insights Texas A&M University has developed a new class of biomaterial inks that mimic native characteristics of highly conductive human tissue, which is needed for the ink used in 3D printing, or additive manufacturing. To print the ink, researchers designed a cost-effective, open-source, multi-head 3D bioprinter that runs...
    Fonte: Ingegneria di controllo da ahuff
  • Perché i sussidi per la cattura del carbonio nel disegno di legge sul clima sono una buona notizia per le emissioni
    The Inflation Reduction Act, which US President Joe Biden signed into law last week, will steer tens of billions of dollars into projects designed to capture carbon dioxide that would otherwise be released from power plants and industrial facilities. That provision is proving to be one of the more controversial...
    Fonte: MIT Technology Review di James Temple
  • I ricercatori stampano in 3D una lega nanostrutturata forte e duttile
    Additive Manufacturing Insights Additive manufacturing, also called 3D printing, has emerged as a powerful approach of material development and is being used in manufacturing applications. 3D printing can help create complex and customized parts and high-entropy alloys (HEAs) have a lot of potential for the future in biomedical and aerospace...
    Fonte: Ingegneria di controllo di Chris Vavra
ARTICOLI CORRELATI
Solo corrispondenze esatte
includere gli strumenti online
includere Eventi

WIKI / PARTECIPARE !

Condividete suggerimenti, correzioni, esempi, esperienze o idee che possano essere integrati in questo articolo.

NUOVO / AGGIORNATO

Ultime notizie sull'economia circolare

A circular economy is an industrial system that is restorative or regenerative by intention and design. In a...

Sul riciclo: Se non si può ridurre la canzone, di Pete Seeger

Cultura, riciclaggio e canto: Pete Seeger è stato una leggenda della musica folk e un'icona della giustizia sociale. Ha usato il suo...

Ultime notizie sui designer industriali

Il designer industriale è responsabile della progettazione di prodotti manifatturieri, come automobili, elettrodomestici o giocattoli....

Ultime notizie sull'ecologia urbana

L'ecologia urbana studia come gli insediamenti umani interagiscono con gli ecosistemi circostanti. Comprende un'ampia gamma di argomenti,...

La lista di controllo definitiva per la revisione del progetto

Non chiudete nessuna fase di progettazione senza questa lista. Questa ampia lista di controllo per la revisione del progetto deve essere utilizzata...

EVENTI IN PROGRAMMA